Simpson Strong-Tie H12B10 Heavy Duty Bent Lateral Restraint Strap 1200mm

Summary

The Simpson Strong-Tie H12B10 is a heavy duty lateral restraint strap for use in roof and floor construction, providing horizontal restraint when connecting timber floor and roof systems to masonry walls. At 1200mm long with a 100mm bend, it is designed to meet current Building Regulations and BS5268 Part 3 requirements. Suitable for restraining roof trusses, rafters, and joists tied into masonry, it is a trusted choice for structural contractors and housebuilders.

Features

• Heavy duty design for lateral (horizontal) restraint of roof trusses, rafters, and floor joists tied into masonry walls
• Pre-galvanised mild steel with edge coating for corrosion resistance
• Bent at 100mm - bend should be positioned at the centre of an uncut block or brick
• Downturn held tight against the cavity face of the inner leaf of blockwork
• Fix to timber members using a minimum of 8 no. 3.75 x 30mm square twist nails
• Where fixed to masonry, use hardened nails (dia 4 x 75mm) or wood screws into plastic plugs (dia 5.5 x 50mm)
• Horizontal lateral restraint straps to be spaced at no more than 2m centres
• Complies with Building Regulations and BS5268 Part 3

Specifications

• Model: H12B10
• Type: Heavy duty - lateral (horizontal) restraint
• Overall length (B): 1200mm
• Bend length (B1): 100mm
• Width: 28mm
• Thickness: 4mm
• Hole diameter: dia 6mm
• Material: Pre-galvanised mild steel, edge coated
• Pack size: 1

What's Included

• 1 x Simpson Strong-Tie H12B10 Heavy Duty Bent Lateral Restraint Strap 1200mm